Hi Justin,

Not sure if this helps for motion picture film, but this works for print photographs:

You can use a 50:50 mix of distilled water and isopropyl alcohol and a cotton swab for cleaning water soluble dirt. These are the guidelines given by Greg Hill of the Canadian Conservation Institute:
Dampen a cotton swab with the alcohol/water mix. Roll the swab lightly across a piece of blotting paper to absorb a lot of the liquid. Then, gently roll the swab across the surface of the print. Do a small test in a corner first to make sure the emulsion/gelatin layer is not sensitive to water. If you are cleaning color photographic prints, the image can go slightly milky on the surface, but that will disappear when the gelatin dries. Try not to scrub the surface. Some prints will also curl if the emulsion is wetted out in any way, another reason for using only a small amount of moisture. You should consider putting the prints between blotters under weights immediately following cleaning. If the surface is tacky after cleaning, let it dry somewhat before putting it between blotters. You may need to repeat the cleaning a couple of times to make sure it doesn't end up looking streaked.


Mary Grace

Mary Grace Kosta, M.A., M.L.I.S.
Congregational Archivist
485 Windermere Rd., Box 487
London, ON N6A 4X3
(519) 432-3781 x 404

www.csjarchive.org<http://www.csjarchive.org/>


I acknowledge that I live and work on the territory of the Anishinaabeg, Haudenosaunee, Attawandaron (Neutral), and Wendat peoples, and pay my respects to Elders past and present.

[cid:image001.jpg@01DA5756.F2F271B0]

This email, including any and all attachments, (this "Email") is intended only for the party to whom it is addressed and may contain information that is confidential or privileged. The Congregation of the Sisters of St. Joseph in Canada accepts no responsibility for any loss or damage suffered by any person resulting from any unauthorized use of or reliance upon this Email. If you are not the intended recipient, you are hereby notified that any dissemination, copying or other use of this Email is prohibited. Please notify us of the error in communication by return email and destroy all copies of this Email. Thank you.


From: A forum for discussion for the Archives Assoc. of Ontario <[log in to unmask]> On Behalf Of Justin Lovell | | Frame Discreet
Sent: Sunday, February 4, 2024 10:38 AM
To: [log in to unmask]
Subject: HFE 7200 replacement

Some people who received this message don't often get email from [log in to unmask]<mailto:[log in to unmask]>. Learn why this is important<https://aka.ms/LearnAboutSenderIdentification>
Hello friends!

Has anyone find replacement for HFE 7200 film cleaner?  Not available from 3m anymore in Canada and being discontinued.

Isopropyl might be a swap.  For running specifically in a Kodak p200 film cleaner.

Any advice or contacts for discussion is greatly appreciated,


Justin Lovell
Cinematographer & Founder
Associate Member, Canadian Society of Cinematographers & Society of Camera Operators || IATSE 667 DP / Operator

-------------------------------------
www.FrameDiscreet.com<http://www.framediscreet.com/>
Social: @frame_discreet || @justin_lovell
Podcast: Cinematographer Lifestyle<https://anchor.fm/cinematographer-lifestyle>
96 Vine Ave. Unit 1B . Toronto, ON. M6P 1V7 . 1-416-901-5332
====================================

====================================